505 Edge Marker - Outline the region to be extracted, covering all edges; press Ctrl for 'magnetic' edge-finding, Shift to erase
506 Edge Eraser - Erase any portion of marked edge region; Ctrl-click to erase entire edge
507 Touchup - (Preview mode) Brush to erase on extracted image; press Shift to unerase; keys 1 - 9 set tool pressure
508 Edge Cleaner - (Preview mode) Sweep to smooth jagged edges of extracted image; Keys 1 - 9 set tool strength
509 Key Color - To extract a region based on color similarity: check Use Key Color, then click with tool to pick reference color
510 Foreground - Click to fill a region to be kept with the extracted image; click again to remove fill
511 Zoom - Click to zoom in on a point; Shift- or right-click to zoom out
512 Pan - Drag to move image in window
513 Preferences\Flood Eraser
514 Channel Mixer
515 Levels
516 Curves
517 Color Balance
518 Flood Eraser
519 Background Eraser
520 files found
521 Click to fill adjacent pixels (within specified tolerance) with the foreground color\nFlood Fill Tool
522 Click to create "spectrum" of colors ranging from foreground to background\nGradient Fill Tool
523 Saving Original
524 Reading Files
525 Undo Enabled
526 Undo memory percentage
527 Undo compression level
528 Undo use disk
529 Undo disk size
530 Color
531 Lightness
532 Drag to rotate about the fixed point in 15-degree steps
533 Fix Red Eye
534 AGIF
535 Insufficient memory to perform operation.
536 %1 already exists.\nDo you want to replace it?
537 Click to repeat forever\nEndless Loop
538 Kodak Photo CD
539 -,-,pcd,0,3,R,-1
540 Importing Kodak PhotoCD Image
541 Render Layer
542 CheckerSize
543 CheckerColour1
544 CheckerColour2
545 Your computer's display properties are set to 256 colors or less.\nPhotoPlus requires that your display be set to 16-bit color or higher.\nUse Windows Control Panel\Display to alter your display properties and then restart PhotoPlus.
546 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nGrill
547 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nSpeech
548 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nThought
549 Drag out shape, Ctrl-drag to constrain; adjust and double-click\nCorner
550 (%d,%d), H:%d, S:%d, L:%d, O:%d%%
551 (%d,%d), H:--, S:--, L:--, O:%d%%
552 (%d,%d), C:%d, M:%d, Y:%d, K:%d, O:%d%%
553 (%d,%d), C:--, M:--, Y:--, K:--, O:%d%%
554 (%d,%d), Grey:%d, O:%d%%
555 (%d,%d), Grey:--, O:%d%%
556 http://
557 Loading document
558 Storing document
559 Printing document
560 Tool Properties
561 Color
562 Brush Tip
563 Layer Manager
564 Navigator
565 Animation
566 Unable to create brush because the selected area is larger than 1000 x 1000 pixels.
567 There are no TWAIN devices available.
568 ViewWebPages
569 ViewWebPagesDays
570 ViewWebPagesLast
571 SnapgridSpacingX
572 SnapgridSpacingY
573 SnapgridColour
574 NumColours
575 Cropping image
576 Deforming image
577 Line: Pos (%p), Length %h, Angle %u
578 Picture Brush
579 Preferences\PictureBrush
580 Origin(%p), Length %h, Angle %u
581 Click on edge; trace outline with mouse button up; click for manual nodes; Delete to retrace; double-click to close marquee\nMagnetic
582 Frequency
583 Contrast
584 Preferences\BackgroundEraser
585 Drag to erase part of active layer; exposes background color when used on Background layer\nStandard Eraser
586 Drag on Background layer to expose transparency (per tool properties) and promote layer\nBackground Eraser
587 RGB
588 Blur
589 Sharpen
590 Preferences\BlurBrush
591 Preferences\SharpenBrush
592 Drag to pick up color and blend in the direction of brush stroke\nSmudge Tool
593 Drag to reduce apparent sharpness under brush\nBlur Tool
594 Drag to increase apparent sharpness under brush\nSharpen Tool
595 Grow Selection
596 Undo History
597 Click to change selected node(s) so adjoining segments are independent; allows pointed intersection\nSharp
598 Click to change selected node(s) so adjoining segments have same slope; segment depth can still differ\nSmooth
599 Click to change selected node(s) so adjoining segments have same slope and depth\nSymmetric
600 Click where you want to add a node, then click this button\nAdd node
601 Click to delete selected node(s)\nDelete node(s)
602 Click to reset mesh to full-frame and rectangular; use Undo to reset mesh to original state\nReset Mesh
603 Click to hide mesh for better image preview; click again to reveal mesh\nHide/Show Mesh
604 Click to fill a region with transparency (per tool properties) based on color under first click\nFlood Eraser
605 file found
606 Shift-Click to define clone source
607 No
608 Y pos
609 Width
610 Height
611 Cache on / off
612 Cache central / local
613 Animated GIFs on / off
614 Max GIF size for animation
615 Thumbnail width
616 Thumbnail height
617 Local cache filename
618 Location for browser cache
619 c:\temp
620 SerifBrowseFile.sbw
621 PhotoPlusBrowseLog
622 Clear time High
623 Clear time Low
624 Clear cache - are you sure?
625 Channel Mixer
626 Curves
627 Levels
628 Color Balance
629 Brightness/Contrast
630 Hue/Saturation
631 %d by %d pixels
632 %d by %d pixels per inch
633 bytes
634 Serif Photoplus File Format
635 color space
636 compression
637 Directory
638 Window Size & Position
639 Edge Marker
640 Foreground
641 Edge Eraser
642 Key Color
643 Touchup
644 Edge Cleaner
645 Zoom
646 Pan
647 Show Extra Controls
648 Tolerance
649 Tracing Bitmap
650 Start Preview
651 End Preview
652 ResourceCD
653 Tutorials
654 PhotoPlus Tutorials not found
655 PhotoPlus Resource CD
656 Resource CD-ROM Not Installed\n\nIn order to view the PhotoPlus Tutorials or Browse the Resource CD, you must have purchased the Serif PhotoPlus 7 Resource CD-ROM.\n\nThe Resource CD-ROM contains an invaluable collection of 15 professionally designed Tutorials, a new AutoTrace vector conversion enhancement for PhotoPlus 7, 1000 Photo-Objects with transparent backgrounds, over 50 new Picture Brushes, 100 Photo Frames and a range of creative samples for inspiration!\n\nYou can purchase this additional CD-ROM from Serif. Choose Help/Contents, then click Support for details about contacting Serif.
1002 Click to add a new light source, then click in preview window to place light source
1004 Slider 1\nSlider 1
1006 Delete the currently selected light source
1007 Click to clone selected frame as a new frame\nNew Frame
1017 Change this value to alter the hue
1021 Change this value to alter the saturation
1024 Brush Opacity\nBrush Opacity
1025 Fades brush while drawing\nFades brush while drawing
1026 Drag to set the blur value
1027 Change this value to alter the opacity
1028 Drag to set the tolerance value
1029 Drag to set the depth value
1030 Change this value to alter the depth
1034 Change this value to alter the angle
1035 Change this value to alter the number of waves
1040 Drag to localize or spread out the blur effect, as shown in the inset graph
1044 Drag to set the hue value
1046 Drag to set the brightness value
1048 Change this value to alter the localization of the blur, as shown in the inset graph
1049 Drag to set the saturation value
1052 Drag to adjust the amount of blurring
1053 Drag to set the luminance value
1057 Change this value to alter the amount of blurring
1059 Select the color channel to which the noise will be applied
1067 Check to adjust only the Hue value
1068 Generating Animation
1076 Select a color channel to view its value distribution
1088 Change this value to alter the number of times the animation loops
1093 Drag to set the green value
1095 Drag to set the blue value
1096 Slider 4\nSlider 4
1097 Change this value to alter the red bias
1098 Change this value to alter the green bias
1099 Zoom In
1100 Change this value to alter the blue bias
1101 Zoom Out
1106 Drag to set the red value
1112 Drag across a section of image to tag additional color range(s)
1114 Drag across a section of image to tag initial color range
1128 Check to use radial blur effect
1129 Check to select desired light type; drag source handles to adjust properties
1131 Check to use zoom blur effect
1132 Check to select desired light type; drag source handles to adjust properties
1135 Change this value to alter the tolerance
1136 Drag to set the intensity value
1137 Change this value to alter the intensity
1138 Check to use fragment blur effect
1146 Drag to set the angle value
1147 Drag to set the ripples value
1148 Change this value to alter the number of ripples
1150 Color tolerance to sample color\nColor tolerance to sample color
1152 Changes brush size based on pressure\nChanges brush size based on pressure
1153 Change brush opacity based on pressure\nChanges brush opacity based on pressure
1157 Use all layers\nUse all layers
1158 Aligned\nAligned
1159 Sets the number of times the animation repeats
1160 Change this value to set the number of milliseconds which each newly created frame will be displayed for
1162 Smooths edges\nSmooths edges
1163 Line weight\nLine weight
1165 Smooths edges of the selection\nSmooths edges of the selection
1166 Softens edges of the selection\nSoftens edges of the selection
1168 Click to select previous frame of sequence\nPrevious Frame
1169 Click to select next frame of sequence\nNext Frame
1170 Click to halt playback\nStop
1171 Click to play sequence\nPlay
1172 Click to select first frame of sequence\nFirst Frame
1173 Click to select last frame of sequence\nLast Frame
1175 Click to delete selected frame(s)\nDelete Frame
1176 Exporting Picture
1177 Click for fixed number of repeats\nFixed Loop
1178 Creating Preview
1179 Registration
1180 Name
1181 Click an effect to select it for use
1182 Click to display Animation Effects dialog for defining transitions between frames
1183 Cyan
1184 Yellow
1185 Magenta
1186 Black
1187 Custom
1188 Screens
1189 File Information
1190 Crop marks
1191 Registration targets
1192 Registration stars
1193 Grayscale bar
1194 Color bar
1195 Screen
1196 Drag box or click on preview to change image view in window
1197 Company
1202 Check to generate all frames as new frames in the sequence; uncheck to overlay the effect with existing frames
1211 Check to build "two-way" sequence morphing to end state and back again
1218 Check to use motion blur effect
1240 Slider 2\nSlider 2
1241 Slider 3\nSlider 3
1259 Determines how pixels interact with those on layers below; see Help/Effects Gallery\nBlend Mode
1260 Change this value to alter the threshold
1265 Disable animation looping
1266 Frame Delay
1275 Click to select the desired lens type
1276 Click to select the desired lens type
1277 Click to select the desired lens type
1278 Change this value to alter the brightness
1288 Drag to set the tolerance value
1289 Drag to set the blur value
1337 Change this value to alter the amount of time this frame will be displayed for
1338 Change this value to alter the number of frames to which the effect will be applied
1342 Click to zoom in\nZoom In
1344 Click to zoom out\nZoom Out
1346 Check to preview current layer only; uncheck to preview all visible layers
1347 Drag to adjust transition value between black and white, or enter new value above
1348 Adjust to control direction of the effect
1351 In-range areas appear as white, those out of range as black
1352 Drag to fine-tune tagged colors
1353 Change this value to set the lumanince
1354 Check to adjust all three channels together; uncheck to adjust individually
1355 Move cursor to see statistics for a particular value
1356 Drag to set the number of waves
1357 Drag to set the opacity value
1358 Change this value to alter the blur
1359 Check to apply the effect
1360 Click to define a new filter
1361 Click to delete selected filter
1362 Change this value to alter the opacity of the currently selected layer
1363 Drag to set the contrast value
6000 Unknown
6001 DemoDir
6002 DemoDirTitle
6003 Error running Astound demo
6004 No Line
6005 Hairline
6006 Custom
6007 &Properties
6008 [Black]
6009 [White]
6010 [Clear]
6011 [Original]
6012 [Registration]
6013 Unnamed
6014 red
6015 yellow
6016 green
6017 blue
6018 cyan
6019 magenta
6020 light gray
6021 gray
6022 brown
6023 rouge
6024 sea green
6025 purple
6026 navy blue
6027 dark green
6028 orange
6029 pink
6030 dark gray
6031 blush
6032 banana
6033 mint
6034 lime
6035 chocolate
6036 mist
6037 parchment
6038 terracotta
6039 lilac
6040 burgundy
6041 cream
6042 peach
6043 sky blue
6044 Colors
6045 User Colors
6046 Expanding
6047 Copying
6048 Compressing
6049 Misc
6050 N/A
6051 Assertion failed at %s, %d
6052 Assertion failed
6053 Directories
6054 %%%s%%\%s
6055 Title
6056 CD-ROM
6057 Disk
6058 Drive %1!s! is not ready or contains the wrong %2!s!.\n%3!s!
6059 Drive %1!s! is not ready or contains the wrong %2!s!.\nPlease insert the %3!s! and press Retry.
6060 Drive %1!s! is not ready or contains the wrong %2!s!.\nPlease insert the %2!s! containing\n%3!s!\nand press Retry.
6061 Fill Palette
6062 Ink Palette
6063 Unknown
6064 Linear
6065 Unnamed
6066 Unused
6067 Radial
6068 Solid
6069 GraphicImportFilters
6070 GraphicExportFilters
6071 Placable Metafile
6072 Windows Metafile
6073 Windows Enhanced Metafile
6074 Windows Bitmap
6075 -,-,WMF,0,0,V
6076 -,-,WMF,1,1,V
6077 -,-,EMF,2,2,V
6088 -,-,BMP,3,3,R
6089 File appears to be %s, not %s.\nClick Yes for %s, No for %s, or Cancel
6090 Importing Bitmap
6091 Exporting Bitmap
6092 Importing Image
6093 Clear
6094 RGB(%d,%d,%d)
6095 Please insert the CD-ROM containing your photos and press Retry.
6096 Software\Serif\Common
6097 Software\Serif\
6098 Snap Grid
6099 Preferences
6100 Scroll to see more tabs
6101 Drag to see more tabs
6102 Right-click for options
6103 Hint\n
6104 Arial
6105 Small Font
6106 Unknown
6107 System\CurrentControlSet
6108 control
6109 Current User
6110 Ms Sans Serif
6111 Shared32DllDir
6112 SerifDll
6113 cm
6114 centimeters
6115 i
6116 in
6117 inches
6118 mm
6119 millimeters
6120 p
6121 points
6122 pp
6123 picas
6124 d
6125 didots
6126 cd
6127 ciceros
6128 ∞
6129 degrees
6130 rads
6131 radians
6132 %
6133 percent
6134 inches-10ths
6135 "
6136 pt
6137 Welcomed
6138 This application is unable to run due to\nan installation or registration problem with\n%s.\nPlease reinstall and try again.
6139 %s: SetAllocSize %d (%d)
6140 %s: AccessCheck %d (%d)
6141 %s: AccessGrow %d (%d)
6142 %s: InsertArrayAt %d,%d (%d)
6143 %s: InsertAt %d,%d (%d)
6144 %s: RemoveAt %d,%d (%d)
6145 CFraction: divide by zero
6146 TabBar Slider
6147 CVector: divide by zero
6148 Portable Network Graphics
6149 -,-,PNG,5,5,R
6150 pix
6151 pixels
6152 ft
6153 feet
6154 yd
6155 yards
6156 m
6157 meters
6158 km
6159 kilometers
6160 mi
6161 miles
6162 grads
6163 gradians
32771 Vary the brightness and/or contrast
32772 Vary the hue, saturation, and/or lightness values
32773 Evenly distribute the lightness levels
32774 Invert each color, replacing it with an "opposite" value
32775 Create a monochromatic (black and white) representation
32776 Flip horizontally\nFlip horizontally
32777 Flip vertically\nFlip vertically
32778 Rotate the image, layer, or selection through a preset or variable angle
32779 Select the entire active layer
32780 Select nothing (Shortcut: Click with any selection tool)
32781 Select the portion of the active layer outside the current selection
32782 Save the current image in a file format other than PhotoPlus (.SPP)
32783 Shrink the borders of the selection by a specified number of pixels
32784 Extend the borders of the selection by a specified number of pixels
32785 Check to show rulers; uncheck to hide rulers
32816 Restore the zoom view to 100%
32817 Blur the edges of the selection by a specified value
32818 Check to show the alignment grid; uncheck to hide grid
32819 Click arrow to display flyout\nRetouch Tools
32821 Click arrow to display flyout\nText Tools
32822 Drag with tool on the image to move it in relation to its window\nPan Tool
32823 Left-click with tool on the image to zoom in; right-click to zoom out\nZoom Tool
32824 Drag to draw freehand lines with current brush tip on active layer or within selection\nPaintbrush Tool
32825 Click on a pixel to select adjacent pixels similar in color; higher tolerance value (On Tool Properties tab) includes more pixels\nColor Selection Tool
32826 Left-click with tool to define foreground color; right-click to define background color\nColor Pickup Tool
32827 Click arrow to display flyout\nFill Tools
32828 Drag to "spray paint" with current brush tip on active layer or within selection\nAirbrush Tool
32829 Shift-click to define pickup point; dragging elsewhere copies pixels from pickup region\nClone Tool
32832 Create a new layer above the active layer (Shortcut: Right-click layer name)
32833 Clone the contents of the active layer onto a new layer
32834 Delete the active layer (Shortcut: Right-click layer name)
32837 Drag selection or layer to move image contents; Alt-click then drag to duplicate\nMove Tool
32838 Click arrow to display flyout; +Shift to add, +Alt to subtract; press Ctrl after drawing for Move tool\nStandard Selection Tools
32839 Click arrow to display flyout; +Shift to add, +Alt to subtract; press Ctrl after drawing for Move tool\nStandard Selection Tools
32842 Zoom in
32843 Zoom out
32845 Single view
32846 Double view
32847 Quad view
32848 Apply the Posterize effect, specifying the number of tonal levels (lightness values)
32849 Display the Histogram window, with image statistics and value graph
32850 Change the pixel size and/or print size of the whole image
32851 Change the image width and/or height by adding or subtracting edge pixels
32853 Apply a basic variable Blur effect
32854 Apply the Gaussian Blur effect, which averages pixel values along a curve
32856 Sharply emphasize both horizontal and vertical edges
32857 Isolate horizontal edges
32858 Isolate vertical edges
32859 Isolate both horizontal and vertical edges
32861 Add noise (grain)
32863 Apply the Median Cut effect for broader areas of similar color
32864 Sharpen the image
32865 Apply a subtle blur effect
32868 Apply the Solarize effect for dramatic changes in mid-tone regions
32870 Apply the Emboss effect for a bas-relief impression
32872 Apply the Mosaic effect for a tiled appearance
32873 Apply the Twirl distortion effect
32874 Apply the Ripple distortion effect
32875 Apply the Wave distortion effect
32876 Apply the Pinch (concave) or Punch (convex) distortion effect
32878 Check to show the marquee defining the edges of the selection
32879 Extend the selection to include any pixels on the active layer close in color value
32881 Combine the visible layers into a single layer
32882 Combine all layers, visible and invisible, into a single layer
32883 Vary the hue, saturation, and/or lightness of a portion of the color range
32884 Apply Motion, Radial, Zoom, or Fragment blur effects
32886 Apply either a Spot or Candle lighting effect
32887 Add a Diffuse Glow effect, broadening existing highlights
32888 Drag out region (Ctrl key constrains), adjust edges, double-click to crop\nCrop Tool
32889 Use a dialog to define custom filters
32891 Add a diffused shadow effect "behind" solid regions of the active layer
32892 Customize PhotoPlus settings, including undo, plugin, layout, and startup options
32894 Choose a TWAIN source such as a scanner or digital camera
32895 Display the acquisition dialog for the selected TWAIN source
32896 Add a rounded-edge and/or drop shadow to solid regions on the active layer
32897 Click arrow to display flyout; drag out shaped selection, adjust, double-click to confirm\nAdjustable Selection Tools
32899 Move the active layer to the top of the layer stack
32900 Move the active layer to the bottom of the layer stack
32901 Move the active layer up one level in the layer stack
32902 Move the active layer down one level in the layer stack
32908 Drag to draw straight line using foreground color; +Ctrl to constrain in 15-degree steps\nLine Tool
32909 Create a new image file from the contents of the Clipboard\nPaste as New Image
32910 Insert the contents of the Clipboard as a new layer in the current image
32911 Duplicate contents of selected region (on all visible layers) to the Clipboard
32912 Insert the contents of the Clipboard centered in the current selection, replacing it
32913 Add a Lens Flare effect, simulating interaction of light source with camera optics
32914 Preview the current image in your World Wide Web browser
32915 Click to place horizontal slice guide; +Shift for vertical; drag guides to move them, or off top/bottom to delete\nImage Slice Tool
32918 Combine the active layer with the visible layer below it, forming a new single layer
32923 Layer Properties\nLayer Properties
32924 Export slices in the active document\nExport slices
32925 Click arrow to display flyout\nImage Map Tools
32929 Spread out the lightness levels
32931 Extend the selection to include adjacent pixels close in color value
32933 Click button, then on a toolbar or tab for associated Help topic\nContext Help
32935 Create a mask that reveals the entire active layer
32936 Create a mask that hides the entire active layer
32937 Create a mask that reveals the selected region, hides the remaining portion of the layer
32938 Creates a mask that hides the selected region, reveals the remaining portion of the layer
32939 Remove the mask from the active layer and cancel the mask's effects
32940 Check to make changes to active layer's mask; uncheck to edit active layer directly
32941 Check to see active layer's mask. Darker mask values = more transparent pixels below
32942 Check to see how the layer looks without the mask's effects
32953 Edit Palette\nEdit Palette
32954 Load Palette\nLoad Palette
32955 Save Palette\nSave Palette
32957 Check to show the Layer Manager tab; uncheck to hide it
32958 Check to show the Tool Properties tab; uncheck to hide it
32959 Check to show the Color tab; uncheck to hide it
32960 Check to show the Brush Tip tab; uncheck to hide it
32961 Check to show the Navigator tab; uncheck to hide it
32962 Vary the distribution of lightness values in the red, green, and blue channels
32963 Remove the portion of the image (on all layers) outside the edges of the selection
32965 Image Map Properties\nProperties
32966 Delete Image Map\nDelete
32967 Bring Image Map to Front\nBring to front
32968 Send Image Map to Back\nSend to back
32969 Bring Image Map forward one\nForward one
32970 Send Image Map back one\nBack One
32971 Apply a deformation\nDeform
32972 Drag to move, scale, or rotate region; watch cursors; press Shift, Alt, Ctrl for HintLine tips\nDeform Tool
32974 Save the current image under its original name, using the original file format
32975 Save the current image under a different name, using the original file format
32976 Display Export Optimizer to preview and select export formats and options
32977 Remove color information while retaining light and dark gradations
32978 Correct the "red eye" effect in photos taken with a flash
32979 Check to show the Tools toolbar; uncheck to hide it
32980 Check to show the Standard toolbar; uncheck to hide it
32982 Display the PhotoPlus Effects Gallery, with examples of image effects and blend modes
32983 Flip Image\nFlip Image
32984 Flip Layer\nFlip Layer
32985 Flip Selection\nFlip Selection
32986 Flip the entire image left to right
32987 Flip the active layer left to right
32988 Flip the selection left to right
32989 Flip the entire image top to bottom
32990 Flip the active layer top to bottom
32991 Flip the selection top to bottom
32992 Check to show the Animation tab; uncheck to hide it\nShow/Hide Animation Tab
32994 Impose the mask's effect onto the active layer
32995 Promote to Layer
32996 Promote to Layer\nPromote to Layer
32997 Promote to Layer\nPromote to Layer
32998 Render Layer\nRender Layer
32999 Register your copy of PhotoPlus\nRegister your copy of PhotoPlus
33016 Launch the image segmentation tool
33022 Click arrow to display flyout\nWarp Tools
33023 Drag to pull pixels in the direction of brush stroke\nElastic Warp Tool
33024 Drag to push pixels 90∫ to right of brush stroke; clockwise for pinch, counter-clockwise for punch effect\nThick/Thin Warp Tool
33025 IDC_WARP_REFLECT
33026 IDC_WARP_PUNCH
33030 Drag to reduce strength of current warp effect\nUnwarp Tool
33031 Drop Shadow
33032 Inner Shadow
33033 Outer Glow
33034 Inner Glow
33035 Bevel and Emboss
33036 Color Fill
33037 Outer Bevel
33038 Inner Bevel
33039 Emboss
33040 Pillow Emboss
33041 Use to adjust handles of shape on active shape layer\nNode Tool
33044 Browse for files
33047 Click to display mesh; drag mesh nodes and lines to deform image; use Mesh toolbar to customize mesh\nMesh Warp Tool
33053 Open File
33054 File Information
33055 Bring up preferences for Browser
33060 Browse the resource CD
33061 View the PhotoPlus tutorials
57344 PhotoPlus
57345 Ready
57600 Display the Startup Wizard or New dialog to create a new image file\nNew
57601 Display the Open File dialog to open an existing image file\nOpen
57602 Close the current image file
57603 Save the current image as a PhotoPlus (.SPP) file under its current name\nSave
57604 Save the current image as a PhotoPlus (.SPP) file under a different name
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the current image\nPrint
57609 Display full pages\nPrint Preview
57610 Update the container to show any changes\nUpdate
57611 Save a copy of the active document with a new name\nSave Copy
57616 Open the named file
57617 Open the named file
57618 Open the named file
57619 Open the named file
57620 Open the named file
57621 Open the named file
57622 Open the named file
57623 Open the named file
57624 Open the named file
57625 Open the named file
57626 Open the named file
57627 Open the named file
57628 Open the named file
57629 Open the named file
57630 Open the named file
57631 Open the named file
57632 Delete the contents of the selected region without placing a copy on the Clipboard
57633 Erase everything\nErase All
57634 Duplicate the contents of selected region or active layer to the Clipboard\nCopy
57635 Delete contents of the selected region or active layer and place a copy on the Clipboard
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57638 Show Rulers
57639 Save On Exit
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Reverse the most recent change to the current image\nUndo
57644 Reverse the most recent Undo action\nRedo
57645 Save Preferences
57646 Preferences
57647 Contract Selection
57648 Open another window for the active image
57649 Arrange the minimized windows
57650 Arrange the windows as overlapping tiles
57651 Arrange the windows as horizontal, non-overlapping tiles
57652 Arrange the windows as vertical, non-overlapping tiles
57653 Split the active window into panes\nSplit
57654 Expand Selection
57655 Feather Selection
57664 Display version and copyright information
57665 Close PhotoPlus
57666 Display the main Help menu
57667 Display the index of Help topics
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Check to show the Tools toolbar; uncheck to hide it
59393 Check to show the HintLine; uncheck to hide it
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restore the window to normal size
61203 Activate Task List
61215 Activate this window
61216 ForeColour
61217 BackColour
61218 Preferences\Lasso
61219 Preferences\Magnetic Lasso
61220 Preferences\Freehand Lasso
61221 Preferences\QuickSelection
61222 Feather
61223 Antialiased
61224 Colour Table
61225 Num Colours
61226 New Frame
61227 Delete Frame(s)
61228 Animation Effect
61229 Sample Merged
61230 Drop Shadow
61231 Bevel
61232 Hue/Saturation/Lightness Filter
61233 Bevel Filter
61234 Brightness and Contrast Filter
61235 Custom Filter
61236 Diffuse Glow Filter
61237 Drop Shadow Filter
61238 Fade Filter
61239 Gamma Correction Filter
61240 Gaussian Blur Filter
61241 Emboss Filter
61242 Noise Filter
61243 Blur Filter
61244 Median Filter
61245 Mosaic Filter
61246 Posterize Filter
61247 Sharpen Filter
61248 Solarize Filter
61249 Lens Flare Filter
61250 Lighting Effects Filter
61251 Move Filter
61252 Pinch/Punch Filter
61253 Replace Color Filter
61254 Ripple Filter
61255 Blur Effects Filter
61256 Threshold Filter
61257 Twirl Filter
61258 Wave Filter
61259 Image Preview
61260 Stop
61261 Play
61262 of
61263 Help\Websites
61264 Dont Show Online Information
61265 Help
61266 &OK
61267 &Cancel
61268 &Help
61269 Move Frame
61270 The currently selected layer must be visible in the current frame for animation effects to be applied.
61271 Undo Animation Effect
61272 Red
61273 Blue
61274 Green
61275 Luminance
61276 Gray
61277 Ready
61278 Change this value to alter the luminance
61279 Applying Grayscale
61280 Frame
61281 Depth
61282 Channels
61283 Percentage
61284 Tile Size
61285 Levels
61286 Intensity
61287 Direction
61288 You cannot move a layer below the background layer\n
61289 You cannot move the background layer\n
61290 Cannot open background layer\n
61291 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPie
61292 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nStar
61293 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nDonut
61294 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPolygon
61295 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nArrow
61296 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nDouble Arrow
61297 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nChevron
61298 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nMoon
61299 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nTear
61300 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nBadge
61301 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nHeart
61302 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nSpiral
61303 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nPetal
61304 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nZig Zag
61305 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nWave
61306 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nGrill
61307 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nSpeech
61308 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nThought
61309 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nCorner
61310 Drag out region, Ctrl-drag to constrain; +Shift to add, +Alt to subtract; after selecting, press Ctrl to move, Ctrl+Alt to duplicate\nCornered Rectangle
61311 Drag to move, scale, or rotate region; watch cursor for cues; press Shift, Alt, Ctrl for HintLine tips on special options
